October 2019 Newsletter

Announcement!

DMIC is pleased to introduce our Outside sales team, led by Sales Manager ~ Don Couchman, Dan Arnet and Steve Dellos.

Don resides in Michigan and has direct sales responsibility for the Midwest, part of the New England area and Canada. Don has years of distribution sales experience, including the DMIC product line, and he looks forward to supporting the needs of distribution throughout the US and Canada. Don can be reached at 716-860-5553 or dec@dmic.com.

Dan’s background is in mechanical engineering, including power transmission equipment, fluid power/ valves & systems. Dan reside in Arizona and has worked in the industrial market. Dan will service our West Coast customers. Dan can be reached at 716-998-4546 or dfa@dmic.com.

Steve’s background is in industrial distribution and hydraulics in both sales and management roles. Steve resides in Ohio and has worked in the industrial market as well. He will be calling on our customers in the Southeast and East Coast. Steve can be reached at 716-870-0691 or sad@dmic.com.

Don, Dan and Steve bring many years of experience and are eager to meet you, our valued customers, and we would like to invite you to meet the team as they exhibit in the upcoming trade shows.
Motion + Power Technology Expo
October 15th-17th, 2019
Booth 2535
Cobo Center
Detroit, MI
DMIC has also been given a special code, which will allow for free admission into the show. To receive free admission, please visit https://motionpowerexpo.com/, click on Register Today in the top right corner, and use Guest Pass Registration code: MEX241 to gain free entrance to the show.

Fluid Power Technology Conference
November 19th-20th, 2019
Booth 207
Wolstein Center
Cleveland State University

Our Inside sales team is led by Inside Sales Manager ~ Paul Rutkowski and includes Bill Heisler, Alex Haird and Ashley Evans. They can be reached at 716-743-4360 or sales@dmic.com

sincerely,

DMIC Sales

Read More

Product Change Notice

DMIC has implemented the following product improvements to standard stainless steel ball valves. These changes affect only the stainless steel models in series BVH, BVAH, and BVHS ball valves. Prices are unaffected by these changes.

Crank Handles
Standard crank handles are now made of 300 series stainless steel instead of zinc plated carbon steel. This new handle is identified by accessory code “K” in position IV of the accessory code matrix. This call out is only necessary when accessories are added to the valve. Standard SS valves without additional accessories will include 300 series SS crank handles. Stop washers for SS valves are also converting to 300 series SS.

Locking Handle Accessories
The standard accessory lock brackets and levers are now also made of 300 series stainless steel instead of zinc plated carbon steel. The SS locking handle option is identified by accessory code “P” in position I of the accessory code matrix. The typical accessory code call out for locking handles for these valves now changes from “AZZA” to “PZZK”.

The “Accessory Codes” table has been updated to reflect these change. Get the update here: Accessory Codes Table

Read More

Actuated Ball Valves

Ball valves are an excellent choice for shut-off control in fluid handling systems. They are durable, simple, and available with a wide assortment of installation options. For automation requirements, ball valves can be fitted with many types of valve actuators, including double-acting pneumatic, spring-return pneumatic, electric, and hydraulic types.

As experts in the design and manufacture of high pressure and exotic application ball valves, DMIC is often called upon to provide accessory actuators for these devices. With full design and manufacturing capabilities, DMIC routinely fabricates brackets and shafts to adapt just about any ball valve to many popular actuator brands. DMIC also offers self-designed, high-torque hydraulic actuators.

Various accessories are available for actuators as well, including limit switches or proximity sensors for remote indication of valve position, solenoid valves for actuation air supply control, and manual override hand-wheels.

The next time you need an automated shut-off control valve, turn to DMIC – the experts in ball valve design and automation.

Read More

HM Hydraulic Manifolds

DMIC Series HM hydraulic manifold blocks, also known as bar manifolds, provide industry standard mounting of four-port hydraulic directional control valves in accordance with ISO 4401 mounting hole patterns. Blocks are available in three standard sizes to accommodate up to six stations. Parallel or series circuits are supported as well as SAE and BSPP threaded ORB port connections. A choice of ductile iron or aluminum construction offers a 5000 psi or 3000 psi pressure rating, respectively.

Manifold blocks assist with hydraulic power system circuit design and operation by simplifying component layout through the elimination of connection plumbing and associated leak points. Manifolds with multiple stations support the installation of several valves to a single manifold where a common pressure and tank connection is facilitated.

Whether for stationary or mobile hydraulic power applications, the Series HM manifold blocks represent a high quality, time-saving system design component.

Read More

BVALP Suction Ball Valve

DMIC’s Model BVALP ball valve offers hydraulic power system designers a compact, high-quality alternative for hydraulic fluid reservoir shut-off requirements.

The low profile design is ideal for space-restricted installations, which is further supported by the innovative welded-ring interface that provides a direct connection of the valve to the hydraulic fluid reservoir tank.

Interface to external plumbing is facilitated by either an SAE Code 61 or ANSI Class 150 flange connection. The valve can also be provided with an optional tank-side female NPT threaded port to support the connection of a suction strainer.

Standard materials of construction for the valve include a lightweight, machined aluminum body, brass trim, Teflon ball seals, and Buna-N O-rings. Optional Viton, EPR, Delrin, PEEK and other materials are available to provide compatibility with a wide range of fluids as well as environmental requirements. A choice of weld ring materials, including carbon steel, stainless steel, and aluminum are available to match the reservoir tank for ease of welding. Typically installed on the input side of a hydraulic pump, the BVALP is suitable for suction applications as well as other requirements to 250 psi. The valve is offered in standard bore sizes up to 4 inches. Special versions are available. Popular accessories include lockable handles and limit switches to provide remote indication of whether the valve is open or closed.

Read More

October Newsletter

Another custom hydraulic manifold heading out the door at DMIC.

Whether you need a standardized bar manifold for mounting directional control valves or a custom hydraulic manifold to suit a specific motion control requirement, DMIC has your solution. With extensive CNC machining capabilities, DMIC has the resources to supply quality manifolds to meet your needs in a timely fashion. Parallel or series geometries are supported as well as porting for BSPP, ISO6149, or SAE ORB connections; and flange interfaces for SAE J518 Code 61 and Code 62 configurations. Contact DMIC today to discuss your hydraulic manifold requirements.

Read More

July 2018 E-Newsletter

New Product Announcement!


Series F3J/F6J Tee Junction Blocks

  • SAE Code 61 or Code 62.
  • Carbon Steel or Stainless Steel Construction.
  • 4-bolt Companion SAE on Opposing Faces.
  • Either 4-bolt SAE Companion UNC or SAE O-ring Flange on Branch Face.
  • Simplifies Hydraulic Line Connectivity.


Series F3E/F6E 90° Elbow Blocks

  • SAE Code 61 or Code 62.
  • Carbon Steel or Stainless Steel Construction.
  • 4-bolt Companion SAE on One Face.
  • Either 4-bolt SAE Companion UNC or SAE O-ring Flange on 90° Face.
  • Simplifies Hydraulic Line Connectivity.


Series F3C/F6C Connector Blocks

  • SAE Code 61 or Code 62.
  • Carbon Steel or Stainless Steel Construction.
  • Simplifies Hydraulic Line Connectivity.
  • Gender Changer for Standard SAE Flanges and Split Flange Heads with O-ring Groove.
Read More

BVH series Ball Valves Now Rated to 7500 psi

Delaware Manufacturing Industries Corp. (DMIC) is pleased to announce the expanded BVH series of high pressure, high quality ball valves. These precision valves are engineered and manufactured in the USA to provide faithful service in demanding fluid handling applications to 7,500 psi.

The BVH series is compatible with many piping arrangements through a wide assortment of connections, including NPT, BSPT, SAE ORB, BSPP, JIC, Socket Weld, Butt Weld, ANSI Flanges, SAE Flanges, and Split Flanges with port sizes ranging from 1/4″ to 1-1/2”. Carbon steel and stainless steel versions, as well as a variety of sealing materials, offer compatibility with a diverse range of liquids. Ball valve accessories include locking handles, limit switch brackets, actuators, tapped holes for secure mounting, and a variety of surface finish treatments.

The versatile and dependable BVH series of high pressure ball valves from DMIC are offered with quick delivery to satisfy numerous requirements in hydraulic power systems, oil & gas production, and industrial fluid handling applications.

Read More